Masters® ABS−PRO-X Fast Set Yellow Cement, 946 ml
$13.05
Masters® ABS1L-X ABS-PRO-X Fast Setting ABS cement, 946 ml. MASTERS® ABS-PRO solvent cement is ideal for joining all schedules and classes of ABS pipe and fittings up to 6″ in diameter with interference fit.
Masters® ABS1L-X ABS-PRO-X Fast Set ABS cement, 946 ml. MASTERS® ABS-PRO-X solvent cement is ideal for joining all schedules and classes of ABS pipe and fittings up to 6″ in diameter with interference fit.
MASTERS® ABS-PRO-X is Low VOC and meets South Coast Quality Management
District (SCAQMD) 1168/316A or BAAQMD Method 40, as well as ASTM D2235.
MASTERS® ABS-PRO-X is recommended for use on potable water or DWV, and is
available in a regular setting formula as well as a fast setting formula (ABS-PRO-X),
ideal for colder temperatures.
Technical Information
Directions
• Cut pipe ends square, chamfer and clean pipe ends.
• Check dry-fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug.
• Use a suitable applicator at least ½ the size of the pipe diameter.
• Clean and prepare pipe and fitting with a listed Cleaner and/or Primer, where local code requires.
• Apply a liberal coat of cement to pipe, approximately the depth of the socket. Leave no uncoated surface.
• Apply a coat of cement to the inside of the fitting, avoid pooling or puddling of cement.*
• Apply a second coat of cement to the pipe.
• Assemble parts quickly as cement must be in a fluid state when joining.
• Push pipe fully into the fitting using a ¼ turning motion until the pipe bottoms.
• Hold pipe and fitting together for 30 seconds to prevent pipe push-out (longer in lower temperatures).
• Wipe off excess cement for a clean esthetic appearance.
• Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger
diameter piping.
Weight | .946 kg |
---|
Reviews
There are no reviews yet.