AquaHeat Pro 4 Zone Master w/ Pump Relay
$88.36
The AquaHeat Pro 4 Zone Master w/ Pump Relay control is for use with 24 VAC NC actuators (Normally Closed). The MASTER with 4 zones is a wiring module with built in pump logic. All the main electrical connections for water floor heating system are existing. This box can be adapted either on a DIN rail or directly on a wall.
Out of stock
The AquaHeat Pro 4 Zone Master w/ Pump Relay control is for use with 24 VAC NC actuators (Normally Closed). The MASTER with 4 zones is a wiring module with built in pump logic. All the main electrical connections for water floor heating system are existing. This box can be adapted either on a DIN rail or directly on a wall. (the DIN rail mounting permit to add with facility a SLAVE module or TIMER). It connects room thermostats to their corresponding actuators. The state of the zones are indicated by individual LEDs. By using terminal A and B, the pilot wire of thermostats can be controlled by an external TIMER. As soon as there is a heat demand from one zone a relay with 2 potential-free contacts is switchedon (pump, boiler or other possible connection).
Technical Information
AquaHeat Pro 4 Zone Control Installation
Specifications
Operating Temperature | 32°F – 122°F (0ºC – 50ºC) |
Circuit Protection | Class I – IP20 |
Power Supply | 24 VAC +/- 10% |
Output | Pump & accessories: Relay => 2 free contact 8A 120Vac Zones: 4 independent zones => the maximum output power of each zone depends on thermostat connecting on this zone. The maximum current for all connected actuators is 2.5A |
Weight | 0.3 kg |
---|
Reviews
There are no reviews yet.