dahl is known to be the market leader in quality. This is evident in the weight of their products. They are all backed by a lifetime warranty and are manufactured in Canada using only North American materials. Dahl pioneered the mini-ball™ valve and continue to evolve with the times.
Specifications
Material |
Lead-Free Brass |
Pattern |
Angle, Water Hammer Arrester Valve |
Finish |
Chrome Plated |
Inlet Pipe Type |
PEX-F1807 |
Inlet Size |
1/2 F1807 Crimp, Clamp or Press Connection |
Outlet Size |
3/8 OD Comp |
Technical Information
611-PX3-31-14WHA Submittal Sheet
611-PX3-31-14WHA CDN-Water-Hammer-Arrester-Valves
Installation Instructions
INSTRUCTIONS:
Instructions for 611-PX3-31-14WHA
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
CRIMPEX (Crimp for PEX): Follow tube manufacturer’s instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer’s instructions; Special ring, nut, or an insert may be required.
Position arrester at any angle.
Reviews
There are no reviews yet.