Saniflo 018 Sanicom 1 Commercial Gray Water Drain Pump 1 HP
$1,231.91
Saniflo 018 Sanicom 1 Commercial Gray Water Drain Pump is 1 HP and is used as a drain pump for pump gray water away from a variety of fixtures in commercial and residential applications. The system is able to discharge the waste up to 25 feet vertical and/or 250 feet horizontal. This model was designed to sustain the toughest applications from commercial applications where hot water can be an issue as it is capable of handling up to 194°F.
Saniflo 018 Sanicom 1 Commercial Gray Water Drain Pump is 1 HP and is used as a drain pump for pump gray water away from a variety of fixtures in commercial and residential applications. The system is able to discharge the waste up to 25 feet vertical and/or 250 feet horizontal. This model was designed to sustain the toughest applications from commercial applications where hot water can be an issue as it is capable of handling up to 194°F.
Features
- For commercial applications
- ↑ 25 Ft ↑ and/or ← 250 Ft →
- Low inlets for easy installation
- Can handle multiple fixtures simultaneously
- Capable of handling up to 194°F
Specifications
Max. horizontal discharge | 25 ft |
Max. vertical discharge | 250 ft |
Voltage | 120 V |
Frequency | 60 Hz |
Amperage | 8.3 Amps (Max) |
Motor | 1.3 HP oil-filled thermally protected motor |
Capacitor rating | 45 microfarad |
Operating temperature | 194°F |
Power cord length | 50 inches |
Noise level (measured at 3 ft.) | ≤ 68 dBA (Lp) |
Discharge pipe diameter | 1″ |
Discharge rate at 15 ft | @25 Ft : 22 GPM |
Discharge rate at 3 ft | 50 GPM |
Shut-off head | 44 ft |
Normal running time | 4-6 Seconds (Short bursts) |
Capacity | 2.75 gallons / 10.4 liters |
Inlets diameters | 2” (sides) |
Ventilation diameter | 1-1/2″ vent (top) |
Type of activation | Pressure switches, Circuit board |
Shower/bath base height | 10” min |
Weight | 22 lbs / 10 kg |
Certifying agencies | CSA (IPC, NSPC), IAPMO (UPC) |
Type de station | A poser |
Reviews
There are no reviews yet.