AquaHeat Pro 4 Zone Slave Panel
$71.60
The AquaHeat Pro 4 Zone Slave Panel is for use with the AquaHeat Pro 4 Zone Master or Pro 6 Zone Master control. Relay control is for use with 24 VAC NC actuators (Normally Closed). It gives you the ability to add more zones to your project.
Out of stock
The AquaHeat Pro 4 Zone Slave Panel is for use with the AquaHeat Pro 4 Zone Master or Pro 6 Zone Master control. Relay control is for use with 24 VAC NC actuators (Normally Closed). It gives you the ability to add more zones to your project. This box can be adapted either on a DIN rail or directly on a wall. (the DIN rail mounting permit to add with facility a master module or timer). It connects room thermostats to their corresponding actuators. The state of the zones are indicated by individual LEDs. By using terminal A and B, the pilot wire of thermostats can be controlled by an external timer. As soon as there is a heat demand from one zone a relay with 2 potential-free contacts is switched on (pump, boiler or other possible connection).
Technical Information
AquaHeat Pro 4 Zone Control Installation
Specifications
Operating Temperature | 32°F – 122°F (0ºC – 50ºC) |
Circuit Protection | Class I – IP20 |
Power Supply | 24 VAC +/- 10% |
Output | Zones: 4 independent zones => the maximum output power of each zone depends on thermostat connecting on this zone. The maximum current for all connected actuators is 2.5A |
Weight | 0.3 kg |
---|
Reviews
There are no reviews yet.